We supply the most suitable sawmill machinery for the needs of our customers.
-
For efficient log processing
High production log processing system with high efficiency, fewer labor, and a space saving. -
For correcting curvature,
warpage and bending of
pillars, beams and girders
after drying
Correcting curvature, warpage and bending and planing four sides of pillars, beams and girders.
-
For meeting custom
specifications with various
types of lumbering
From remanufacturing boards for a wide variety of custom specification to processing slab that can be productized. -
For mass production with gang saws
Ideal for mass-produced materials such as laminated boards and studs.
Product lineup
-
Super Hakusan Canter 350 SHC350
This is a high-performance sawmill machine that can minimize the installation area and produce one pillar and four boards after inserting a log by one-pass operation although this procedure normally requires four machines through nine processes. -
Canter System Plus FK-5000
Logs can be transferred into the machine without sorting logs in diameters due to reciprocating lumbering system with a chucking transport device, which also enables you to chip logs along the curves and cut short boards out of root zone.
-
Leveling four-side Planer MTD-450/
with Quadruple Saws MTD-450-4R
The curvature, warpage and bending of dry flat pillars and square pillars can be effectively corrected up to the maximum size of 450 mm width. As an option, the four circular saws that can freely move into set position can be installed behind this four-side planer. -
STR Hakusan Z-1 STR-Z1
The degree of curvature, warpage and bending of pillars, beams and girders are automatically measured and corrected at an optimum yield rate under the attitude control. Furthermore, this composite lumbering system offers you wide variety of works processed by such as twin table resaw with circular saws and gang saws with two-side planer.
-
STR Hakusan with Two-side Planer
STR-420
Installing two-side planers (up and down) to the flexible function meeting custom specifications with various types of lumbering allow producing smooth four-side surface of timbers in customized size. Planing boards on only the product side allow you to remanufacture without concerning with planer. -
Gang ripper with double-arbor
AAG-300
The double arbor (up-and-down) circular saws enable utilizing thin and small circular saws. This lower cutting force makes the finished surface very smooth. The riving knives and exclusive charger that an operator can place boards without standing at the front are installed as a safety measurement for kickback.
-
Multiple Gang Ripper MGR-400
A digital manual system adjusts space between six cutting blades in a 0.1 mm unit, which saves time due to no need changing spacers, which leads to increasing production efficiency. -
Variable Saw 6RS-450
The six cutting circular saws and holding equipments move automatically. If combined with an optimizer, this machine will offer processing any thickness and width of untrimmed boards. Additionally, two-side planer can be equipped as an option.
